of 1 sht a b angles: 2 scale: 8:1 w SD01307 rev 40 amp power receptacle date jwh revised per drawing ronics date drawn winchester electronics corporation lec wallingford, connecticut 06492 customer t 62 barnes industrial road north 04/14/08 by er7306 description b rev 10/18/00 jmc date approved 10/18/00 kjt date approved 10/18/00 jed date approved cwb cwb 10/16/00 appd e er t inches per asme y14.5m-1994 unless otherwise specified: dimensions are in inches [mm] tolerances: decimal: .xx [x.x] .01 [0.3] .xxx [x.xx] .005 [0.13] .xxxx [x.xxx] .xxxx 1 .020 .51 .040 1.02 .33 8.38 .250 6.35 .220 min. pad 5.59 reccomended p.c. board layout scale 4:1 catalog p/n: 01307 notes: unless otherwise specified 1. for general series specifications, see sd74-0000. 2. material specifications: b05 per uns 53800 3. finish specifications: .000030 min. gold oer astm b488 over .000050 min. nickel per ams qq-n-290. 4. electric al specifications: current rating: 20 amp. 5. for use with 14 ga wire or equivalent. 6. refer to cap10-01 for cable assembly procedure. .218 5.54 4x .078 1.98
|